Data shown is for informational purposes only and does not constitute investment advice. TopFund is not SEBI-registered. Consult a SEBI-registered advisor before investing.
Epack Prefab Technologies IPO
Price Band
₹194.0–204.0
Issue Size
₹504.0 Cr
Lot Size
73 shares
Min Investment
₹14,892
GMP
—
Issue Price
₹204.0
Epack Prefab Technologies IPO AI Summary
- Epack Prefab Technologies IPO is listed on BSE, NSE in the Industrial Products sector.
- Price band: ₹194.0–₹204.0 per share, lot size 73 shares (min. investment ₹14,892).
- Subscription window: 24 Sep–26 Sep 2025, listing on 01 Oct 2025.
Epack Prefab Technologies Limited is set to launch its IPO with an issue price of ₹204.0, aiming to raise ₹504.0 Cr. The company has shown strong revenue and profit growth in recent years, supported by its diverse market presence and manufacturing capabilities.
TopFund is not SEBI-registered — this is educational analysis, not personalized investment advice.
Epack Prefab Technologies IPO — Third-Party Research Views
Reviews below reflect analyst calls made before this IPO closed on 26 Sep 2025 — not a current signal.
2 of 2 reviewers say Neutral
Recommendations are sourced from third-party research firms and are not TopFund's own investment advice.
Important Dates
Subscription Status
Subscription data unavailable
Epack Prefab Technologies IPO Grey Market Premium (GMP) Today
GMP not available yet
Grey Market Premium is updated daily. Check back closer to the listing date.
About the Company
Incorporated in February 1999, Epack Prefab Technologies Limited eangaed in turnkey pre-engineered steel buildings and prefabricated structures, handling design, fabrication, installation for industrial, institutional, and commercial sectors. It also manufactures EPS thermocol blocks, sheets, and shaped packaging items for insulation and packaging solutions, serving packaging and construction industries. Business areas: Pre-Fab Business EPS Packaging Business As of March 31, 2025, the company’s total capacity at its three manufacturing facilities in Greater Noida, Ghiloth, and Mambattu is 1,26,546 MTPA pre-engineered capacity and 510,000 SQM of Sandwich Insulated Panels. Additionally, they have three design centres in Noida, Hyderabad, and Vishakhapatnam. Services & Products: Pre-engineered Steel Buildings Pre-fabricated Structures Light Gauge Steel Framing Sandwich Insulated Panels Standard modular solution As of March 31, 2025, the company employed 849 permanent staff members. Competitive Strength Strong and diverse market presence with comprehensive offerings in the growing pre-engineered steel buildings industry. Well-located manufacturing facilities and strong in-house design and engineering capabilities give us a significant cost advantage. Long-standing relationships with customers across a diverse set of industries. Strong financial performance and Order Book. Experienced Promoters and Management team with extensive domain knowledge.
Company Financials (₹ Cr)
As of 2025-03-31
| Period Ended | 31 Mar 2025 | 31 Mar 2024 | 31 Mar 2023 |
|---|---|---|---|
| Assets | 931.02 | 613.72 | 432.05 |
| Total Income | 1,140.49 | 906.38 | 660.49 |
| Profit After Tax | 59.32 | 42.96 | 23.97 |
| EBITDA | 117.79 | 87.00 | 51.53 |
| NET Worth | 353.93 | 168.96 | 126.10 |
| Reserves and Surplus | 337.01 | 165.08 | 122.22 |
| Total Borrowing | 210.23 | 145.31 | 105.93 |
Key Ratios
EPS
₹6.92
NAV
₹45.66
ROE
22.69%
ROCE
22.88%
RoNW
22.69%
P/B Value
9.36
P/E Ratio
29.49
Market Cap
₹2049.22 Cr
PAT Margin
5.20%
Debt/Equity
0.15
Peer Comparison
| Company | NAV | RoNW | P/E (x) | EPS Basic | EPS Diluted |
|---|---|---|---|---|---|
| Beardsell Ltd | 20.58 | 12.91% | 30.32 | 2.49 | 2.49 |
| Interarch Buildings Limited | 451.57 | 18.03% | 30.32 | 68.51 | 68.03 |
| Everest Industries Ltd. | 377.12 | -0.6% | -298.2 | -2.28 | -2.28 |
| Pennar Industries Ltd. | 73.99 | 12.74% | 27.5 | 8.84 | 8.84 |
| Epack Prefab Technologies Limited This IPO | 45.66 | 22.69% | — | 7.65 | 7.39 |
Promoters
Sanjay Singhania, Ajay DD Singhania, Bajrang Bothra, Laxmi Pat Bothra and Nikhil Bothra
Objects of the Issue
The Company proposes to utilise the Net Proceeds from the Issue towards the following objects: # Issue Objects Est Amt (₹ Cr.) 1 Financing the capital expenditure requirements for setting up new manufacturing facility at Ghiloth Industrial Area, Shahjahanpur, Alwar in Rajasthan for manufacturing of continuous Sandwich Insulated Panels and pre-engineered steel building (Project) 102.97 2 Financing the capital expenditure towards expansion of existing manufacturing facility at Mambattu (Unit 4) in Andhra Pradesh for increasing the pre-engineered steel building capacity 58.17 3 Repayment and/or pre-payment, in full or part, of certain borrowings availed by the Company 70.00 4 General Corporate Purposes 54.04 5 Issue Expenses 24.89 Total 310.08
IPO Evaluation
Generated 23 Sep 2026Revenue Trend
Total income was ₹660.49 Cr in the year ending March 31, 2023, rising to ₹906.38 Cr by March 31, 2024, and further increasing to ₹1,140.49 Cr by March 31, 2025. This indicates a consistent upward trend in revenue over the periods.
Profit Trend
Profit After Tax was ₹23.97 Cr for the year ending March 31, 2023, increasing to ₹42.96 Cr by March 31, 2024, and further rising to ₹59.32 Cr by March 31, 2025. This shows a positive growth trajectory in profitability across the reported periods.
Valuation
At the issue price of ₹204.0, Epack Prefab Technologies has an implied P/E ratio of approximately 29.49 based on its EPS of ₹6.92. This is comparable to peers, which have P/E ratios ranging from 27.5 to 30.32.
Grey Market Premium, Explained
The grey market refers to the unofficial trading of shares before they are listed on the stock exchange. It provides an indication of the expected demand for an IPO based on the price at which shares are being traded in this market. A higher grey market premium (GMP) suggests strong demand, while a lower or negative GMP may indicate weak interest.
Who This IPO Suits
Investors comfortable with short-term volatility and a long-term investment horizon typically weigh IPOs like this against their overall portfolio strategy and risk tolerance. It's important to consider the company's growth prospects and market position.
Who May Want to Wait
Investors who prefer stable and established companies with predictable earnings may want to avoid IPOs like this, which can be more volatile and carry higher risk. Those who are risk-averse might consider other investment options.
IPO Timeline, Explained
The IPO process includes several key dates: the opening date for subscription is September 24, 2025, and the closing date is September 26, 2025. Allotment of shares will be done on September 29, 2025, and the shares are expected to be listed on the stock exchange on October 1, 2025.
Listing Gains — The Risk
Listing day gains can be unpredictable and depend on various factors, including market conditions and investor sentiment. While some IPOs may experience significant gains on their first day of trading, others may not perform as expected. It's essential to understand that past performance is not indicative of future results.
This evaluation is generated from Epack Prefab Technologies's own public IPO filing data for educational purposes and is not investment advice or a recommendation to apply, subscribe to, or avoid this issue — see Broker Recommendations below for named third-party research views (clearly attributed, not TopFund's own). TopFund is not a SEBI-registered investment adviser — see our Disclaimer.
Frequently Asked Questions
What is the price band of Epack Prefab Technologies IPO?
The price band of Epack Prefab Technologies IPO is ₹194.0–₹204.0 per share.
When does Epack Prefab Technologies IPO open and close?
Epack Prefab Technologies IPO opens on 24 September 2025 and closes on 26 September 2025.
When does Epack Prefab Technologies IPO list on the stock exchange?
Epack Prefab Technologies IPO listed on 01 October 2025 at ₹204.0.
What is the lot size for Epack Prefab Technologies IPO?
The lot size for Epack Prefab Technologies IPO is 73 shares, requiring a minimum investment of ₹14,892.
What is the price band for the IPO?
The price band for the IPO is ₹194.0 to ₹204.0.
What is the minimum investment required?
The minimum investment required is ₹14,892.0.
What is the lot size for the IPO?
The lot size for the IPO is 73 shares.
When is the listing date?
The listing date is October 1, 2025.
What does GMP mean?
GMP stands for Grey Market Premium, which indicates the expected demand for the IPO shares before they are officially listed.
Issue Details
Investor Allocation
Registrar
Lead Managers / Book Running
IPO Timeline
Open
24 Sep 2025
Close
26 Sep 2025
Allotment
29 Sep 2025
Listing
01 Oct 2025
Similar IPOs in Industrial Products
Plan Your IPO Investment
Related Articles
Community Sentiment
What are other investors planning for Epack Prefab Technologies?
No votes yet — be the first to share your view.
Sign in to voteDiscussion
User-generated content — not investment advice, and not verified or endorsed by TopFund.
No comments yet — start the discussion.